Operators, Technicians, Supervisors and other Jobs

Recruitment!!

1. Production Superintendent
2. Production Supervisor
3. E & I Supervisor
4. Mechanical & Barge Supervisor
5. Medics
6. Chief Operator
7. Snr. Operator
8. Operator
9. Snr. Mechanic
10. Mechanic
11. Snr. Electrician
12. Electrician
13. Snr. Instrument Technician
14. Instrument Technician
15. Desk Pusher
16. Deck Hands
https://lnkd.in/dyAfPZ9

 

JOB DESCRIPTION

Chief Production Operator

 Roles and Responsibilities

  • Oversee the platform operation and ensure production is maintained within given operating parameters.
  • Interpretation of P&IDs, PFD, SAFE charts, Isometric
  • Carry out and ensure that all operations are in accordance with scope of services as laid down in the operating contract and to acceptable oilfield
  • Carry out operations in adherence to CHESROC Policies and
  • Record all daily activities and inform the Production Supervisor of the status of the production plant at any given
  • Co-ordinate subordinates in the daily operations of the process
  • Monitor process on Cimplicity window using the Programmable Logic Controller (PLC) in the control room.
  • Optimization of production chemicals (setting of chemical injection rate).
  • Optimization of production
  • Lead in all process plant shutdown and
  • Carry out estimation of chemical / hydraulic oil consumption and issue request to warehouse/AMNI for replacement.
  • Carry out well test and data validation
  • Preparation of morning/production
  • Coordinate and monitor gas lift / injection
  • E-permit system and CAMMS administration for process plant
  • Lead in the installation, decommissioning and commissioning of plant
  • Assist in process design modification, equipment ratings and management of change in the
  • Lead in the efficient operation of production
  • Drive the implementation and promotion of CHESROC NIG.LTD QHSE policies and procedures on the
  • Actively participate in loss prevention
  • Coordinate subordinate toward achieving set
  • Ensure plant parameters are recorded effectively and the records are stored and backed up
  • Actively participate in the training/coaching of
  • Attend to his/her personal development by following the applicable development
  • Document all applicable equipment
  • Ensure that all process safety equipment are serviced and
  • Assist in other department as instructed by the
  • Ensure that good housekeeping is carried out in the production control room (PCR) and process plant /
  • Suggest improvement

Requirement:

Bsc or HND Chemical, Petrochemical or production engineering

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male

  

JOB DESCRIPTION

Crane Operator/Deck Pusher

Role Description and Responsibilities

  • Operate, supervise and assist in all crane operations, continually assess the requirements of the operation and responsible for handling of materials and other
  • Focal point for all platform lifting and barge
  • Assisting in the assembly, dismantling and lubrication of pumps, deck machinery and other equipment as directed M & B
  • Responsible for assisting in loading and back loading of materials from Boats and Helicopters
  • Ensure that the Langley operates in accordance with current legislation and guidance from the relevant National authorities, and in accordance with contractual obligations as it relates to marine operations, regulations and
  • Supervises all operations of Barge control and ensures that operation is conducted safely `and efficiently.
  • Direct/perform evacuation or abandon platform operations. The decision to evacuate the platform will be taken by the Production Superintendent/OIM.
  • Conduct operations in a safe manner according to Company policies and
  • Ensure that relevant Chesroc Health & Safety policies, as well as rig specific procedures, are communicated to and understood by department
  • Communicate to subordinates daily through pre-tour / tool-box meetings
  • Participate in all drills as focal point
  • Observes proper operating procedures flag up any unsafe practices
  • Make up part of emergency crews performing duties as required by station bill or as otherwise directed.
  • Supervise works in a safe and conscientious manner to ensure personal safety and the safety of fellow crew
  • Proper use of safety equipment
  • Direct material and/or personnel transfer from Boat and
  • Organize and maintain deck/hull load distribution for barge stability. Also perform technical calculations for barge
  • Supervise and co-ordinate annual or other formal systematic structural inspection (ABS etc)
  • Direct subordinates in routine inspection of platform
  • Supervise the testing and checking of Life Boat equipment and
  • Supervise activities to ensure the platform structural integrity is
  • Operate, maintain and repair safety equipment which includes fire damper
  • Oversee the maintenance of a sanitary living
  • Direct crew in emergency marine evacuation or abandon rig scenario as per instruction of Production Superintendent. (Decision to abandon/evacuate platform remains prerogative of the Production Superintendent).
  • Have basic understanding of platform Production system and Emergency Shutdown
  • Evaluate subordinate with M & B supervisor
  • Train crew in emergency evacuation for deck crew, organize and supervise the activities of section
  • Ensure supervisor is advised of all current and/or changing conditions
  • Read and interpret the various gauges, meters and instruments required to carry out operations
  • Calculate metal centric height
  • Perform emergency/damage control calculations
  • Calculate longitudinal/transverse/vertical center of gravity
  • Perform pre-load calculations
  • Use communication equipment and other instruments such as radar screens, VHF radio and various gauges and alarms.
  • Carryout the platform directives as instructed by the Mechanical and Barge Supervisor

 

Requirement:

Bsc or HND or OND in Mechanical engineering IADC certification in offshore crane operation

Certification in Banksman and slinging or any other lifting certification

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male

 

  

JOB DESCRIPTION

 Deck Hand

 Roles Description and Responsibilities

  • Operate and assist in all crane operations, continually assess the requirements of the operation and responsible for handling of materials and other
  • Responsible for assisting in the assembly, dismantling and lubrication of pumps, deck machinery and other equipment as directed M & B
  • Responsible for assisting in loading and back loading of materials from Boats and
  • Performs manual labour around the on the facility which includes scrapping, painting, cleaning of equipment, walls, deck
  • Operate, maintain and repair main and emergency equipment as requested by the
  • Preventive maintenance Services [PMS] on cranes and all associated components according to the M & B’s maintenance
  • Implement all permits to work system
  • Organize platform deck for efficient and safe operation while maintaining good house
  • Monitor and service environmental protection equipment
  • Inspect all lifting equipment, slings, straps, shackles, wire rope, etc and confirm their certification before
  • Carry out use proper procedures for painting, cleaning and moving of equipment and use proper PPE for the
  • Look out for safety hazards and notify supervisor accordingly
  • Maintenance of drain system
  • Carry out minor rigging up/down and stage scaffold when
  • Technically inclined – able to use and maintain power tools which are in use on the Langley.
  • Reports stock levels of paint and
  • Carry out firefighting activities during fire drill and emergency
  • Carry out proper surface preparation and application of 2 component paint
  • Assist in all mechanical work and other departments as required;
  • Assist in picking up and moving special equipment/tools or any special operations
  • Set priorities on work
  • Perform HLO duties as assigned
  • Observe and take action at all times of load limitations of crane; permissible loads versus book angle; number of lines reefed on main block and mechanical/weather criteria (shock load, etc)
  • Maintain good communications by keeping supervisors informed;

progress of assigned tasks, condition of equipment, equipment failures, damage, etc.

  • Perform other duties as assigned by M & B supervisor and Crane Operator/Deck pusher.

Requirement:

OND in any engineering field or any otherdiscipline Riggers certification

IADC certification in offshore crane operation

Certification in Banksman and slinging or any other lifting certification

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male

 

 

JOB DESCRIPTION

 E & I Supervisor

 Roles & Responsibilities:

  • Focal point for all electrical and instrumentation
  • Supervise / operate and maintain the Wellhead Control Panels in conjunction with Surface Safety Valves (SSV), Shutdown Valve (SDV) and Surface Control Subsurface Safety Valve (SCSSV).
  • Supervise / operate, simulate and troubleshoot GE Fanuc/ Allen Bradley Programmable Logic Controller (PLC) in conjunction with I/O junction
  • Interpretation of P&IDs, Instrument schematic drawings, flow diagrams and cause & effect diagrams. Make recommendations and modification where
  • Supervise / perform operation and service power generation equipment which includes Generators, Engine controls, Switchgears, Transformers and Power
  • Supervise and perform maintenance and repair of HVAC system, Refrigeration systems, Power and Communication
  • Carryout configuration of motor controllers such as Siemens SIMOCODE and
  • Operate, maintain, troubleshoot & repair Reverse Osmosis Water making unit (MECO unit), which includes the Programmable Logic Controller (PLC) and solenoid valve
  • Ensure daily inspections and maintenance of Electrical and Instrument equipment are carried
  • Enforce the permit to work and isolation system within the Electrical and Instrument
  • Ensure the proper implementation of the Preventive Maintenance System (PMS) according to the RSP in the Computer Aided Maintenance Management (CAMM)
  • Plan periodic maintenance according to the PMS guidelines and coordinate same with supervisors and other department
  • Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation and also generate requisitions as
  • Inform supervisors and other department heads of any technical problems or limitations that may affect the safe operation of the production
  • Implement the outstanding recommendations from audits as issued by Clients, Regulatory Authorities or Rig
  • Ensure that reports for repair and maintenance of equipment are accurate and
  • Assist the OIM in supplying information for maintenance and repair
  • Communicate equipment problems or breakdown to the OIM and equipment
  • Ensure all Electrical and Instrument equipment brought onto the platform, including third party equipment are suitably certified and meets regulatory
  • Plan and coordinate with other departments prior to any major activity on the
  • Operate and maintain Gas and Diesel generator switch board panel, which includes the fine tuning of the electronic governor (Woodward).
  • Manage the power generation system which includes load sharing between generators and load shedding on
  • Troubleshoot and rectify Electrical, Instrument and control
  • Carryout Electrical maintenance on the
  • Carryout Electrical troubleshooting and maintenance of the Lifeboat and Rescue
  • Train and evaluation of
  • Assist and carryout other platform directives as instructed by the Superintendent &

Requirement:

Bsc or HND Electrical & Electronic or instrumentation engineering Certification in Electrical maintenance and reliability

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male

 

 JOB DESCRIPTION

 Instrument Technician

Roles & Responsibilities:

  • Interpretation of PIDs, Instrument schematic drawings, flow diagrams and cause & effect Make recommendation and modifications where applicable.
  • Operate and maintain the well control panels in conjunction with Surface Safety Valves (SSV), Shutdown Valve (SDV) and Surface Control Subsurface Safety Valve (SCSSV).
  • Running of instrument control tubing
  • Installation, maintenance, troubleshooting and calibration of transmitters (Level, Pressure, Temperature & )
  • Installation, maintenance, troubleshooting and calibration of pressure control valves, transducers and valve
  • Installation, maintenance, troubleshooting and calibration of level control valves and associated devices.
  • Installation, maintenance, troubleshooting and calibration of flow control valves and associated devices.
  • Troubleshoot and carryout loop
  • Installation, maintenance, troubleshooting and calibration of Fire and Gas detection systems in conjunction with deluge and water sprinkling
  • Installation, maintenance, troubleshooting and repair of sidewinder chemical injection
  • Calibration of pressure gauges with dead weight
  • Calibration of temperature gauges with fluke temperature
  • Installation, maintenance, troubleshooting and calibration of Barton flow
  • Installation, maintenance and troubleshooting of flow
  • Calibration and maintenance of pressure switches, temperature switches, thermal overload switches.
  • Maintenance and troubleshooting of all safety devices which includes ESD pull stations, sprinklers, fusible plug loops.
  • Calibration check and maintenance of Pressure Safety Valves (PSVs).
  • Work in conjunction with contractors in carrying out hydro static test activities on vessels and pipe spools.
  • Maintenance and troubleshooting of process alarm & strobe lighting
  • Operate, maintain and troubleshooting of emergency fire water pump
  • Installation, maintenance, troubleshooting of process skimmer/diaphragm
  • Assist and carryout other platform directives as instructed by the E & I
  • Carryout tool inventory on Instrument tools on regular basis or as
  • Installation, maintenance, troubleshooting of process field level controllers in conjunction with process
  • Operation, simulation and troubleshooting of GE Fanuc/ Allen Bradley Programmable Logic Controller (PLC) in conjunction with I/O junction
  • Carryout control instrument configuration with Hand Held Monitor (HHM).

Requirement:

Bsc or HND or OND Electronic or instrumentation engineering Certification in instrumentation

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male

 

Job Description

Medic / Administrator

 Job Objective

The Medic / Administrator is responsible for providing medical treatment, maintain proper standards of medical supplies onboard and provide administration support to the PS.

He is responsible for control of documentation.

2.      Tasks and Responsibilities

 The Medic / Administrator is responsible to the PS for:

  • Efficiency controlling and administrating an offshore Medical section in accordance with relevant
  • Providing first line accident treatment and general medical
  • Dispensing
  • Consulting with shore based medical facilities as
  • Controlling and administering drug register and medical
  • Maintaining dangerous drug
  • Maintaining a register of prescribed
  • Maintaining medical
  • Maintaining medical and rescue equipment in good
  • Maintaining stocks of medications and medical equipment at a predetermined
  • Auditing hygiene of catering
  • Carrying out drinking water sampling in accordance with company
  • Involvement in emergency
  • Providing onboard training to first aid
  • Carrying out administration duties as required by PS i.e. maintaining the Personnel On Board (POBs).
  • Co-coordinating helicopter pre-flights
  • Maintaining and posting muster lists, co-coordinating personnel movements on/off
  • COSHH
  • Management of all documentation and in particular controlled documentation ( e.g. P & IDs)
  • Radio Room / Operator duties as
  • Compliance with and committed to:
  • Chesroc Corporate Management System
  • Chesroc Operational Safety Case
  • Operational Procedures and
  • Company Policies and
  • Chesroc Environmental Management System
  • Performing tasks in a safe and efficient
Safety and Environmental Critical Activities

 Control / administration of drugs

Additionally, authority and responsibilities as indicated in Chesroc Corporate Management System Documents apply.

3.        Minimum Qualifications on Recruitment 

  • Manual Handling
  • COSHH Assessor (Full course)
  • Permit to Work
  • Company / Installation Safety Induction
  • Paramedic training desirable

Additional Training 

  • 5 years experience in Hospital environment
  • 3 years offshore experience in a similar position

·         Possession of valid medical, BOSIET and OSP

Gender: Male

 

  

  1. Job Objective

JOB DESCRIPTION

PRODUCTION SUPERVISOR

The Production Supervisor is responsible for the supervision of production staff and contractors

  1. Task and Responsibilities

The Production Supervisor is responsible to the Production superintendent for:

  • Maximizing production operations in a safe manner
  • The safe and efficient operation of the process
  • Advice on chemical rates and optimizing production
  • Reporting incidents and non-conformities.
  • Carrying out assigned duties during
  • Overseeing the monitoring and control of all process plant and other control
  • Monitoring the correct functioning of
  • Communicating deficiencies and malfunctioning to the production superintendent
  • Proper handover during shift change/end of
  • Ensure proper handling of Laboratory work and production
  • Being a member of any fire and emergency teams as
  • Compliance with and commitment to:
  • Blue water Safety Management System
  • Blue water Operational Safety Case
  • The Development and review of operational procedures and manuals
  • Company policies and procedures
  • Blue water Environmental management system
  • Performing tasks in a safe and responsible manner, ensuring all personnel under jurisdiction do the same.
  1. Minimum Qualifications on Recruitment
    • HND or BSC
    • Five Years experience as a lead Operator or production Supervisor in production process

·         Possession of valid medical, BOSIET and OSP

  • Gender: Male
  • Valid international passport

Additional Training

  • COSHH Appreciation
  • Permit to Work/Area Authority
  • Manual Handling
  • Gas Detection/Tester
  • Loss of containment
  • Isolating Authority
  • Accident Investigation
  • Company and Installation Safety Induction
  • Environmental Awareness

 

Job Description

Production Superintendent  

  1. Job Objective

To safely and efficiently manage production operations onboard the installation and act as the Process Area Authority for the Permit to Work System.

2.        Responsibility / Authority 

The Production Superintendent is responsible to the OIM for:

  • Safely meeting production, water injection and Gas Export/Gas Lift targets as agreed by Chesroc and the Client within regulatory
  • The safe operation of the process plant in accordance with laid design
  • Co-ordinating production to minimize downtime arising from planned maintenance and shutdown requirements.
  • Maintaining / analyzing reports of production
  • Performing regular inspections of production plant to verify Chesroc CMS standards are maintained, and routinely inspecting operational activities, to ensure compliance with safe working procedures and
  • Meeting customer requirements safely and under the contract
  • Overseeing the PTW system to ensure permits are co-ordinated between Production and other functions.
  • Ensuring Production personnel understand their emergency response
  • Ensuring that all production personnel are familiar with the Chesroc Quality, Health, Safety and Environmental policies and their application on the
  • Advising the OIM in an emergency situation and assist with emergency response co-ordination.
  • Being conversant with company policy and procedures applicable to production operations to ensure tasks are performed in a safe responsible
  • Budgetary control and cost saving
  • Departmental risk management via hazard identification and
  • Internal auditing.
  • Accident / Incident
  • Compliance with and commitment to:
    • Chesroc Corporate Management System
    • Chesroc operational Safety Case
    • Company Policies and
    • Chesroc environmental Management System
    • The development and reviews of operational procedures and

Safety and Environmental Critical Activities 

  • Department Head and Area Authority for the PTW system
  • Controlling ESD operations / Fire and Gas/DCS.

Additionally, authority and responsibilities as indicated in the Chesroc Corporate Management System Documents apply.

3.        Place in the Organization

  See organization Chart.

 

4.        Minimum qualifications on Recruitment
  • 10 years operational experience in a supervisory position in process plant operations (BSC Chemical, Petro Chemical or Production engineering
  • HNC Process Operations / Chemical Engineering

·         Possession of valid medical, BOSIET and OSP

  • Gender: Male

 Additional Training 

  • COSHH Appreciation
  • Management of Major Emergencies
  • Safe Handling of Hazardous Substances
  • Permit to Work/Area Authority
  • Manual Handling
  • Coastguard SAR
  • OIM Regulations
  • Gas Detection/ Tester
  • Loss of Containment
  • LSA Scale Awareness
  • Isolating Authority
  • Accident Investigation
  • D32/33 Assessor Award
  • NEBS Supervisory Management
  • Company and Installation Safety Induction
  • Environmental Awareness

Emergency Response Duties 

  • Form part of the ERC/CCR

 

 

JOB DESCRIPTION

Mechanical & Barge Supervisor

Roles and Responsibilities

  • Focal point for all mechanical and barge related issues on
  • Supervise / perform installation, commissioning, operations and maintenance of CAT D398 & D3508B and Waukesha L5108 GSI engines. This also includes complete overhaul of these engines
  • Supervise / perform predictive, preventive and corrective maintenance on centrifugal pumps, reciprocating piston pumps, diaphragm pumps, Heat exchangers, Blowers, Screw Air
  • Supervise / perform installation, grouting, alignment and commissioning of various rotating
  • Ensure, monitor and execute maintenance activities to ensure the highest standards in equipment reliability are
  • Supervise / perform operation and maintenance of Reverse Osmosis Water Treatment Unit [ MECO Unit]
  • Make up part of emergency crews performing duties as required by station bill or as otherwise
  • Ensure / perform STOP safety program and be active in use of its
  • Carry out safety equipment operation and
  • Ensure that personnel stand watch in the engine
  • Ensure all routine operations and maintenance procedures on equipment in the engine room and document records updated /
  • Ensure all repair work on all hoisting devices which includes hydraulic and pneumatics systems are carried out.
  • Performs any other duties assigned by the Superintendent/OIM.
  • Supervise / perform work on platform Red Fox Sewage unit which include treatment/cleaning and testing of PH / oxygen
  • Ensure maintenance is carried out with the use of technical manuals and equipment schematic
  • Identify and respond to abnormal operating conditions and flag up issue to superintendent
  • Set schedules to ensure proper equipment optimization and
  • Carry out platform directives as instructed by M & B
  • Ensure that all permits to work system are well understood and
  • Ensure / perform work on Letourneau deck crane and on CAT
  • Ensure / perform maintenance work according to PMS guide lines on Rig Specific procedures (RSP) in the CAMM system.
  • Ensure / perform maintenance work on mechanical components of lifeboat lowering system (DAVIT) and engine system of the
  • Ensure weekly engine maintenance of the Rescue
  • Assist other
  • Maintain an adequate supply of spares in order to fulfil maintenance requirements and facilitate a safe and efficient operation and also generate requisitions as
  • Inform supervisors and other department heads of any technical problems or limitations that may affect the safe operation of the
  • Coach, train and evaluate all subordinates.
  • Implement the outstanding recommendations from audits as issued by Amni and Regulatory
  • Ensure all mechanical and barge equipment brought on the platform,

including third party equipment are suitably certified and meets regulatory requirements.

  • Plan and coordinate with other departments prior to any major activity on the

Requirement:

Bsc or HND Mechanical engineering Certification in CAT engines and PLC

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male

 

JOB DESCRIPTION

 Production Operator 

Role Description and Responsibilities

  • Operation of the production facility and maintain the plant in given operating parameter
  • Carry out all Wellhead operations
  • Interpretation of P&IDs, PFD, SAFE charts, Isometric piping
  • Carry out well test and validate well test
  • Assist in optimizing
  • Carry out directives of the chief production
  • Carry out operations in adherence to CHESROC QHSE Policies and
  • Carry out document control system in
  • Ensuring all process equipment parameters are monitored correctly and the chief production operator is informed of the status of the plant at all
  • Responsible for the coordination of subordinate’s safety during
  • Record / ensure plant parameters are recorded effectively and the records are stored and backed up
  • Carry out Process monitoring on complicity window using the Programmable Logic Controller (PLC) in the control
  • Raise permit to work on all equipment maintenance
  • Ensure Plant equipment skids are kept clean and tidy
  • Lead in the department housekeeping task
  • Ensure all air regulators and gas scrubbers are
  • Carry out and ensure that the hydrocyclones are
  • Carry out and ensure the overflowing of the
  • Lead in production equipment preventive & corrective maintenance work when
  • Assist in the optimization of production chemical (setting of injection rate)
  • Assist in logging of all production
  • File document in hard and soft copies
  • Conduct all production sample analysis on daily basis and update all
  • Responsible for instruction of the production operation assistant on his daily
  • Attend to personal development by following the applicable development
  • Perform all assigned task to the highest standards of
  • Relief the Chief Production operator when need
  • Close out all jobs in the CAMMS on daily
  • Follow up all ongoing activities on the
  • Assist in coaching and training of junior
  • Identify improvement process to optimize production
  • Assist in other department as directed by the Supervisor

Requirement:

Bsc or HND Chemical, Petro Chemical or Production engineering

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male 

Others:

  1. Electrician and Senior Electrician – same requirement as E & I supervisor
  2. Mechanic and Senior Mechanic – Same requirement as M & B supervisor

 

Warehouse Man

 Roles Description & Responsibilities:

 

  • Creating of Item Control Numbers (ICN).
  • Raising of Request Purchase Orders (RPOs).
  • Ensure RPOs are raise for stock replenishment of none available parts as per Client policies/standard.
  • Ensure enough detail and accurate data is entered into Job Control Form (JCF).
  • Follow progress of purchase orders by tracking Requisition of materials through Purchase Authorization Request (PAR).
  • Receive and place material in warehouse stock, this involves creating of Local Purchase Orders(LPOs) on items supplied, receipts of same and transaction numbers established, Bin cards tagging of items and shelving onto
  • Ensure well-stacked/labeled operational materials in the
  • Sorting out materials from
  • Creating warehouse daily issue sheets for recording of the materials issued and issuing same from system with transaction number
  • Maintain log or registers for logging in all approved RPOs and closing same when supplied for easy tracking.
  • Submit monthly reports of warehouse transactions, which include daily departmental consumption tracking
  • Monthly departmental cost tracking/material receipt, issues to operating unit, issues to operating unit –
  • Submit periodic reports of inventory dollar value, which are ensure price posting/documentation.
  • Warehouse receipts both local and International, Warehouse receipts (Transfer), Awaiting invoice report.
  • Submit DOG reports and other inventory reports as required, such as warehouse reports, physical inventory worksheets, local purchase orders, count due reports, Status reports, and bin location reports.
  • Stock Transfer from Standard Inventory Control System (SICS) to Chesroc Inventory Control (CICS).
  • Complete transaction document manifest etc, like delivery notes or materials movement record for all materials in and out the platform
  • Communicate with and support all departments, such as planned materials usage (where & when) for all items
  • Review obsolete and none stock materials in the platform warehouse and advise it to
  • Generate accounting codes on material received via purchase orders, like Property Symbolization system Codes (PSSC).
  • Shipment of materials/Equipment with proper documentation such as boat
  • Ensure good housekeeping every weekend in the two
  • Draw up training program/format and mentoring system for new warehouse
  • ssist in other department as directed by the Superintendent and OIM

Requirement:

Bsc or HND Mechanical or Electrical,

Training or certification in materials management

Min of 5years post NYSC experience in similar industry and similar position Possession of valid medical, BOSIET and OSP

Gender: Male

https://lnkd.in/dyAfPZ9

To Apply for any of the listed position, kindly review the Job Description (See Link Above) to ensure you meet the minimum requirement. Then send a copy of your updated CV with the Job Title you are applying for, alongside a cover letter to RECRUIT@CHESROCMAIL.COM.

 

Related Articles

Back to top button
error: Content is protected !!